How to set a configuration as factory default on PMA devices using Blue Control

How to save a configuration as Factory default using PMA products

-You must first create a new project or open an existing project using Blue Control software (this feature is only available using Blue Control)
-When you configuration is done, download it to your device
-Connect now Blue Control online with the device.
-On the “Diagnostic” window, click on “Apply of data” to same this configuration as factory default.

From now, if any operator modifies or corrupt the configuration by mistake, a reset to factory default will set back the controller to the customer initial configuration. This procedure can be done after optimization to also save adequate PID terms.

The reset to factory default is perform by pressing up & down arrow together at power-up.
Set it to yes, the unit will then display Copy
After restart, the unit is default to your own configuration.