West N & P devices Lock Codes (forgotten lock codes)

For P series hold Up  and Scroll  on power up until you see CLoc.

Use scroll  to see other codes.

This displays the CLoc - configuration, SLoc - set up and TLoc - tune code.

By default, CLoc is normally 20 and SLoc is 10 with no lock code (0) for TLoc.  

For N series hold Up  and Scroll  on power up until you see InPT.

Use scroll  to see the Setup Mode Loc code. On the N series there is a setup menu with a lock code, but on the profiler model there is also a LocP. By default, CLoc is normally 10 on N series. 

If in doubt, try 10 or 20 as the lock code.