Single Phase Thyristors

Enquiry widget West Control Solutions presents a range of thyristor power controllers designed to switch single phase loads. This type of thyristor units is ideal for normal or variable resistive loads as well as transformer and inductive load types.

Relay S – 1PH = Simple on/off firing with a DC logic input, time proportioned burst firing with a DC linear input (basic firing selectable between 4,8 or 16 cycles).

Relay M – 1PH = Time proportioned burst firing with a DC linear input, front panel display & RS485 comms as standard

Relay CL = More complex load requirements inc. feedback and current limit

Relay S - 1PH Thyristor Power Controller

Relay S - 1PH Thyristor Controller

Next Steps:

Ideal for:

  • Normal Resistance
  • Medium and Long Wave IR load types

Benefits & Features:

  • These simple units can be connected with Relay PC to manage multizone system
  • Integrated fuse + fuse holder 
  • power control zone including current transformer and optional circuit board
  • Flat Cable Wiring System (option)
  • Input signal: SSR, Analog as an option
  • Electronic fully isolated from power with constant current drain on input
  • Heater Break alarm option to diagnose partial or total load failure and Thyristor Short circuit
  • Fuse and Fuse holder available as an option
  • Current transformer integrated (with Heather Break option)
  • Special design for Heat sink with very high dissipation value
  • Comply with EMC, cUL (pending)
  • DIN RAIL side by side mounting
  • IP20 Protection

Specification:

  • Up to 700A
  • Single Phase
  • 24Vac to 600Vac Supply
  • DC Logic input
  • 4-20mA or 0-10V DC linear inputs
  • Zero Cross or Burst Firing (4, 8 or 16 cycles @50% power demand).

Relay M - 1PH Thyristor Power Controller

Relay M - 1PH Thyristor Controller

Next Steps:

Ideal for:

  • Normal Resistance
  • Short, Medium & Long Wave IR  load types

Benefits & Features

  • RS485 Comms
  • MODBUS Protocol Standard
  • Frontal Key Pad to configure the unit and to read V,I and Power
  • Configurablity via RS485, USB Port and frontal Key Pad
  • Microprocessor based electronic circuit fully isolated from power
  • Universal input signal: RS485,Pot, Analog and SSR
  • Configurable Control Mode: V, I, V2 and VxI
  • Heather Break alarm to diagnose partial or total load failure and Thyristor Short circuit
  • Digital input configurable
  • Fuse and Fuse Holder Standard
  • Current transformer integrated in Fuse Holder
  • Comply with EMC, cUL pending
  • IP20 Protection
  • DIN RAIL mounting

Specification:

  • Single Phase
  • 24Vac to 690Vac Supply
  • DC logic (SSR)
  • 4-20mA or 0-10V DC linear inputs
  • 10K Pot or RS485 Comms input
  • Zero Crossing
  • Single Cycle
  • Burst Firing
  • Soft Start + Burst Firing
  • Delayed Triggering + Burst Firing
  • Phase Angle, Soft Start + Phase Angle
 Relay CL - 1PH Thyristor Power Controller

Relay CL Thyristor Controller

Next Steps:

Ideal for:

  • Most applications including Short Wave Infrared (SWIR), Silicone Carbide, KanthalSuper & Inductive load types

Benefits & Features:

  • RS485 Comm. MODBUS Protocol Standard
  • Frontal Key Pad to configure the unit and to read V,I and Power
  • Configurablity via RS485, USB Port and frontal Key Pad
  • Microprocessor based electronic circuit fully isolated from power
  • Universal input signal: RS485,Pot, Analog and SSR
  • Configurable Control Mode: V, I, V2 and VxI
  • Current Limit Std adjustable from front unit
  • Profiling current limit via analog input
  • Heather Break alarm to diagnose partial or total load failure and Thyristor Short circuit
  • Digital input configurable
  • Fuse and Fuse Holder Standard
  • Current transformer integrated in Fuse Holder
  • Comply with EMC, cUL pending
  • IP20 Protection
  • DIN RAIL mounting

 

Specification: 

  • Single Phase
  • 24Vac to 690Vac Supply
  • 4-20mA or 0-10V DC linear inputs
  • 10K Pot or RS485 Comms input
  • Delayed Triggering + Burst Firing
  • Phase Angle, Soft Start + Phase Angle

 

Powerstack 1PH Thyristor Power Controller

Powerstack 1PH Thyristor Controller

Next Steps:

Ideal for: 

  • Resistive
  • Inductive
  • Transformer and complex load types requiring current limit and power control modes

Powerstack is a Full digital and universal Thyristor unit based on a very powerful dedicated micro configurable via serial communication port for all inputs, firing modes, control modes and loads types.

Benefits & Features: 

  • Suitable to drive resistive, inductive, transformer and complex loads
  • requiring current limit and power control mode.
  • Frontal Key Pad standard to configure all the internal functions and
  • parameters.
  • Four Analog output configuirable
  • Six Digital input
  • Four realay output
  • Universal Input signal with automatic zero/span calibration.
  • Universal Firing modes, customer configurable via Key Pad or
  • communication port as Burst Firing and Phase Angle.
  • Universal Feed back modes
  • Soft Start can be used in addition to Burst Firing and Phase Angle.
  • Short circuit Thyristor and Heater Break Alarm.
  • RS 485 port. Modbus protocol
  • Comply with EMC
  • IP20 Protection

Specification: 

  • Single Phase
  • 24Vac to 690Vac Supply
  • 4-20mA or 0-10V DC linear inputs
  • 10K Pot or RS485 Comms input
  • Burst Firing, Single Cycle, Soft Start + Burst Firing
  • Delayed Triggering + Burst Firing
  • Phase Angle, Soft Start + Phase Angle